Pc사양 궁금한게있어서요

"Full workstation" example configuration for using any exocad product

• CPU: Intel Core-i9 11900k / AMD Ryzen 9 5900X
  Note:The CPU must be Intel or AMD with x64 architecture, other architectures (e.g., ARM, RISC) and x64 emulations (e.g., Qualcomm Snapdragon, Apple M4) are not supported.
• RAM: 16GB DDR4 non ECC
• Graphics: Nvidia RTX 2060 (6GB GDDR6) or RTX 3070 / AMD Radeon RX 5600 XT or 6700XT (6 GB GDDR6)
• Screen resolution: WQHD (2560x1440), recommended: UHD (3840x2160)
• Power: 750+ Watt
  
  

  Minimum hardware configuration to run exocad DentalCAD

  • CPU: Quad-Core and 2.8 Ghz
    Note: AMD Ryzen ZEN2 CPUs e.g. AMD Ryzen 7 3700X or 3900X are supported starting with 2.3 Matera version (EngineBuild 7174 or newer), released by exocad in August/September 2019.
  • RAM: 4GB
  • Graphics: Nvidia GTX or AMD Radeon series dedicated GPU with at least 1 GB graphics memory, OpenGL 4, DirectX 11.1, Shader Model 5 and a graphics driver dated August 2017 or newer.
  • Minimum screen resolution: 1080p (1920x1080), if a DPI setting of 100% is used. If you use a higher DPI setting, a higher resolution is required!
  • Power: 450 Watt
    
    

    Special graphics card requirements for PartialCAD

    • The software will work with Nvidia and AMD series graphics cards only.
    • A minimum of 4GB graphics memory is required. A minimum CUDA level of 3.0 or OpenCL 1.2 is also required. (see list of CUDA levels of different graphics cards).
    • Older or entry-level Nvidia and AMD chips might not work well, or will result in poor performance.
    • Intel integrated graphics chips are not supported for PartialCAD.
      
      검색해서 찾았는데 언제 자료인지는 모르겠습니다~참고 바랍니다.

i9 11세대면 조금 시간좀 흐른것 같아요. 울트라 7이나 i7 14세대에 4060 넣으시면 충분합니다. 

엑소면 150짜리 견적 짜시면 충분할겁니다 

14600k에 32g램 4060이상 ssd 1T 이정도로 견적짜면 120~130만원도 가능할겁니다

좋은 정보 정말 고맙습니다.

고맙습니다